View Shopping Cart
Sign In
Platinum Authorized Distributor forXytronicXytronic

Xytronic LF-8800 100Watt Soldering/Desoldering System

SKU: XY-LF8800 $379.95
Xytronic LF-8800 100 Watt Solder and Desoldering Station, with internal vacuum pump.

Key Features
• Heater/Sensor Failed Detection: If sensor circuit fails, the heater power is shut down.
• Temperature “Lock-Out” feature: The temperature can be locked with a password code.
• ESD Safe and Spike Free circuitry: The “Zero Voltage” electronic switching design protects voltage and current sensitive   components (CMOS devices, etc.) against damaging current and transient voltage spikes commonly produced by less    efficieny, mechanically switched stations.
• Delayed Suction: To eliminate the problem of solder clogging up the tip, a delayed switch feature has been incorporated for    the unit that allows the pump to continue sucking for 1.5 seconds after the actuator switch is released
• Energy Saver Mode: If the station is left idle for 20 minutes, the energy saver feature will automatically engage, resetting    the temperature to 150°C from the previous setting.
• Iron Working Option: Both soldering, desoldering irons can be used at the same time.
• Optional SMD Tweezers: Specially designed for SMD chips, SOT, Flat pack IC’s etc. reworking.
• Optional Hot Air Pencil (HAP 80): Removes SMD chips and flat packs up to 25mm.

Ships With:
• 307A Soldering iron with pre-loaded standard tip XY-44710652
• DIA100 Desoldering iron pre-loaded with standard tip XY-44915412
• 2 iron Stands the XY-1005c and XY-104A
• Maintenace kit
• 426DLX Fume extractor
• AC power cord and plug
• manual